ARA系列螺旋錐齒輪轉向箱

 技術參數：    
    功率：0.018KW~4.94KW   
    轉矩：6.95~46.8Nm   
  傳動比：1:1，2:1    
  螺旋錐齒輪轉向箱,標準化,多品種,速比1:1、1.5:1、2:1、3:1全部為實際傳動比。平均效率98%。    
  螺旋錐齒輪可以正反運轉，低速或高速傳動平穩，而且噪聲低，振動小，承受力大。   
  螺旋錐齒輪轉向箱有單軸、雙橫軸、單縱軸、雙縱軸可選。    
  齒輪：齒輪采用優質高純凈度合金剛20CrMnTiH滲碳淬火，及研磨而成；   
        轉向箱機殼采用高剛性FC-25鑄鐵鑄造；   
  主軸：軸類采用合金剛調質、高懸重負荷能力；   
  軸承：配備重負荷能力的滾錐軸承；    
  油封：雙封唇片的油封、兼具防塵及防漏油的能力；    
  潤滑：適當?shù)臐櫥�油使用，可以發揮轉向機的效率，并提高其運轉的壽命。   
        a. 初期使用二周或100-200小時，為初摩耗期，這之間可能有少許金屬摩耗粉粒，請務必清潔內部，并換新潤滑油。    
        b.長期使用時，每半年-一年或1000-2000小時更換一次潤滑油
     廣泛用于石油、  化工、   輕工、紡織、食品、塑料、制藥、陶瓷、印染、冶金、礦山、造紙、木業、制革、環保等多種行業的機械設備和流水線，輸送線上。
     ARA系列螺旋錐齒輪轉向箱型號：ARA0轉向箱，轉向器，ARA1轉向箱，轉向器，ARA2轉向箱，轉向器，ARA3轉向箱，轉向器ARA4轉向箱，轉向器。

Technical parameters:

Power: 0.018KW~4.94KW

Torque: 6.95-46.8Nm

Transmission ratio: 1:1, 2:1

Spiral bevel gear steering box, standardized, multiple varieties, with actual transmission ratios of 1:1, 1.5:1, 2:1, and 3:1. The average efficiency is 98%.

Spiral bevel gears can operate in both forward and reverse directions, with smooth low-speed or high-speed transmission, low noise, low vibration, and high load-bearing capacity.

The spiral bevel gear steering box has options for single axis, double horizontal axis, single vertical axis, and double vertical axis.

Gear: The gear is made of high-quality and high-purity alloy 20CrMnTiH carburized and quenched, and ground;

The steering box casing is cast with high rigidity FC-25 cast iron;

Main shaft: The shaft type adopts alloy steel quenching and tempering, with high hanging load capacity;

Bearings: equipped with tapered roller bearings with heavy load capacity;

Oil seal: a double sealed lip oil seal with the ability to prevent dust and oil leakage;

Lubrication: Proper use of lubricating oil can enhance the efficiency of the steering gear and improve its operational lifespan.

a. The initial wear period is two weeks or 100-200 hours of use, during which there may be a small amount of metal wear powder particles. Please be sure to clean the interior and replace with new lubricating oil.

b. When used for a long time, replace the lubricating oil every six months to one year or 1000-2000 hours

Widely used in various industries such as petroleum, chemical, light industry, textile, food, plastics, pharmaceuticals, ceramics, printing and dyeing, metallurgy, mining, papermaking, wood industry, leather making, environmental protection, etc., as well as in mechanical equipment and assembly lines and conveyor lines.

ARA series spiral bevel gear steering box models: ARA0 steering box, steering gear, ARA1 steering box, steering gear, ARA2 steering box, steering gear, ARA3 steering box, steering gear ARA4 steering box, steering gear.